Post by lay1014 on Aug 1, 2018 8:40:27 GMT
Magnetic pump usually consists of motor, magnetic coupling and corrosion - resistant centrifugal pump. Its main feature is the use of magnetic coupling transmission power, completely without leakage, as the motor turns the magnetic coupling of the outer magnetic steel, magnetic field lines through the clearance and isolation sleeve, effect on the magnets inside, make the pump rotor and motor synchronous rotation, no mechanical contact transmission torque, in the power input end of the pump shaft, because the liquid sealed in the stillness of the isolation of different set inside, no dynamic seal and therefore completely without leakage.Common troubleshooting methods for water ring vacuum pump
Magnetic pump is a new type of completely leakless and corrosion-resistant pump developed by the national joint design team of magnetic pump.oil seal working principle and oil seal oil leakage measurements
Magnetic pump is suitable for petroleum, chemical industry, pharmaceutical industry, electroplating, environmental protection, food, film and television washing, water treatment, national defense and other industries. It is an ideal equipment for conveying inflammable, explosive, volatile, toxic, rare and valuable corrosive liquids.magnetic pump is suitable for conveying suction pressure is not greater than 0.2 Mpa, the maximum working pressure of 1.6 Mpa, the temperature does not exceed 120 ℃. The density is no more than 1600kg/m3, and the viscosity is no more than 30*10-6m2/s.cleaning of water ring vacuum pump
High temperature type maximum pressure is 1.6 MPa, the magnetic force pump temperature does not exceed 350 ℃, the viscosity is not greater than 30 * 10-6 m2 / s does not contain liquid of hard particle and fiber. When the pressure of the conveying medium system is greater than 1.6MPa, the pump valve company can carry out special design and manufacturing.the maintenance steps of the vacuum unit